2.8 英寸 TN TFT LCD 模块 - 320×240 显示屏
The 2.8″ TN TFT LCD module from JicTech delivers a 320×240 resolution with clear visuals and compact design. With SPI or MCU interface options, this cost-effective display is ideal for handheld devices, industrial controls, and embedded IoT systems.
产品详细信息:
1.一般规格
| 项目 | 规格 | 说明 |
|---|---|---|
| 液晶显示屏尺寸 | 2.8 inch | |
| 面板类型 | 非晶硅 TFT 有源矩阵 | TN, Normally White |
| 决议 | 240RGB(H) × 320(V) pixels | |
| 显示模式 | TN / Normally White | |
| 颜色数量 | 262K 色 | |
| Viewing Direction (Gray Inversion) | 12 O’clock | |
| 对比度 | 500 (typ.) | |
| 亮度 | 480 cd/m² (typ.) | |
| 模块尺寸(高×宽×高) | 50.00 × 69.20 × 3.45 mm | |
| 有效面积(高×宽) | 43.20 × 57.60 mm | |
| Pixel Size (H×V) | 0.18 × 0.18 mm | |
| 驱动集成电路 | ST7789V2 | |
| 光源 | 4 LEDs (White) | Parallel connection |
| 界面 | RGB parallel | Includes RTP (Resistive Touch Panel) pins |
| 工作温度 | -20°C至+70°C | |
| 存储温度 | -30°C至+80°C | |
| 重量 | 待定 |
2.电气特性
| 参数 | 符号 | 最小 | 类型 | 最大 | 单位 |
|---|---|---|---|---|---|
| System Voltage | VDD | 2.4 | 2.75 | 3.3 | V |
| Interface Operation Voltage | VDDI | 1.65 | 1.8 | 3.3 | V |
| 输入高电压 | VIH | 0.7×VDDI | – | VDDI | V |
| 输入低电压 | VIL | VSS | – | 0.3×VDDI | V |
| 输出高电压 | VOH | 0.8×VDDI | – | VDDI | V |
| 输出低电压 | 沃尔 | VSS | – | 0.2×VDDI | V |
3.背光特性
| 项目 | 符号 | 最小 | 类型 | 最大 | 单位 | 条件 |
|---|---|---|---|---|---|---|
| 正向电压 | Vf | 2.8 | 3.0 | 3.3 | V | If=80mA |
| LED 配置 | – | – | 4 LEDs parallel | – | – | |
| 白色 CIE x | x | 0.26 | 0.28 | 0.32 | – | If=80mA |
| 白色 CIE y | y | 0.26 | 0.28 | 0.32 | – | If=80mA |
4.光学特性
| 项目 | 符号 | 最小 | 类型 | 最大 | 单位 | 条件 |
|---|---|---|---|---|---|---|
| 对比度 | CR | – | 500 | – | – | 正常角度 |
| 亮度(中心) | Lv | 430 | 480 | – | cd/m² | |
| Brightness Uniformity | 白色 | 80 | – | – | % | |
| 响应时间 (Tr+Tf) | – | – | 16 | – | 毫秒 | |
| 视角(CR≥10) | ||||||
| – 3:00 / 9:00 | θ | – | 45 | – | 学位 | |
| – 6:00 | θ | – | 50 | – | 学位 | |
| – 12:00 | θ | – | 20 | – | 学位 | |
| NTSC 比率 | – | – | 55% | – | – |
5.绝对最大额定值
| 参数 | 符号 | 最小 | 最大 | 单位 |
|---|---|---|---|---|
| 电源电压 | VDD | –0.3 | +4.6 | V |
| 逻辑电源电压 | VDDI | –0.3 | +4.6 | V |
| Input Voltage Range | VIN | –0.3 | VDDI+0.5 | V |
| Output Voltage Range | VO | –0.3 | VDDI+0.5 | V |
| 工作温度 | 返回顶部 | -20 | +70 | °C |
| 存储温度 | Tst | -30 | +80 | °C |
6. Pin Description (40-pin FPC Connector)
| Pin(s) | 符号 | 说明 |
|---|---|---|
| 1 | 接地 | 系统接地 |
| 2 | LEDA | LED 阳极 (+) |
| 3–6 | LEDK1–LEDK4 | LED Cathodes (–) |
| 7–10 | XR, YU, XL, YD | Resistive Touch Panel (RTP) Pins |
| 11 | 重置 | 复位信号 |
| 12 | VSYNC | Vertical Sync |
| 13 | HSYNC | Horizontal Sync |
| 14 | DOTCLK | Dot Clock |
| 15 | ENABLE | Data Enable |
| 16–21 | R0–R5 | Red Data (6-bit) |
| 22–27 | G0–G5 | Green Data (6-bit) |
| 28–33 | B0–B5 | Blue Data (6-bit) |
| 34–36 | SD0, SDI, SCL | Serial Interface Pins |
| 37 | CS | Chip Select |
| 38 | IOVCC | I/O Power (1.65–3.3V) |
| 39 | 虚拟通道标志符 | Analog Power (2.4–3.3V) |
| 40 | 接地 | 系统接地 |
7.可靠性和检查
可靠性测试: High/Low temperature storage & operation, thermal shock, ESD (±6kV/±8kV).
终生: 正常运行条件下为 20,000 小时。.
检查标准: MIL-STD-105E,二级,AQL:MAJ=0.65,MIN=1.5。.
8.主要功能
Integrated 4-wire Resistive Touch Panel (RTP)
High brightness (480 cd/m²) and contrast (500:1)
RGB parallel interface for fast graphics rendering
6-bit color per channel (262K colors)
Robust TN panel with EWV polarizer
Compact module with built-in backlight driver
9.应用
Human-Machine Interfaces (HMI)
便携式医疗设备
工业控制面板
Point-of-Sale (POS) terminals
Handheld test and measurement equipment
Interactive consumer electronics
下载技术文件
单击此处下载此文档:FULL SPEC-JV028T1CSR-02B(02D)
All specifications are based on the official product specification sheet (Ver: 02). For mechanical drawings, touch panel performance details, and full inspection criteria, please refer to the original document.
立即咨询,以获得最低价格 报价
我们将在 24 小时内为您提供报价。.


