2.8인치 TN TFT LCD 모듈 - 320×240 디스플레이
The 2.8″ TN TFT LCD module from JicTech delivers a 320×240 resolution with clear visuals and compact design. With SPI or MCU interface options, this cost-effective display is ideal for handheld devices, industrial controls, and embedded IoT systems.
Product Details:
1. General Specification
| 항목 | 사양 | 참고 |
|---|---|---|
| LCD 크기 | 2.8 inch | |
| 패널 유형 | a-Si TFT 액티브 매트릭스 | TN, Normally White |
| 해상도 | 240RGB(H) × 320(V) pixels | |
| 디스플레이 모드 | TN / Normally White | |
| 색상 수 | 262K colors | |
| Viewing Direction (Gray Inversion) | 12 O’clock | |
| 명암비 | 500 (typ.) | |
| 휘도 | 480 cd/m² (typ.) | |
| Module Size (H×V×T) | 50.00 × 69.20 × 3.45 mm | |
| Active Area (H×V) | 43.20 × 57.60 mm | |
| Pixel Size (H×V) | 0.18 × 0.18 mm | |
| 드라이버 IC | ST7789V2 | |
| 광원 | 4 LEDs (White) | Parallel connection |
| 인터페이스 | RGB parallel | Includes RTP (Resistive Touch Panel) pins |
| 작동 온도 | -20°C ~ +70°C | |
| 보관 온도 | -30°C ~ +80°C | |
| 무게 | TBD |
2. Electrical Characteristics
| 매개변수 | 기호 | Min | Typ | 최대 | 단위 |
|---|---|---|---|---|---|
| System Voltage | VDD | 2.4 | 2.75 | 3.3 | V |
| Interface Operation Voltage | VDDI | 1.65 | 1.8 | 3.3 | V |
| 고전압 입력 | VIH | 0.7×VDDI | – | VDDI | V |
| 저전압 입력 | VIL | VSS | – | 0.3×VDDI | V |
| Output High Voltage | VOH | 0.8×VDDI | – | VDDI | V |
| Output Low Voltage | VOL | VSS | – | 0.2×VDDI | V |
3. Backlight Characteristics
| 항목 | 기호 | Min | Typ | 최대 | 단위 | 조건 |
|---|---|---|---|---|---|---|
| Forward Voltage | Vf | 2.8 | 3.0 | 3.3 | V | If=80mA |
| LED Configuration | – | – | 4 LEDs parallel | – | – | |
| White CIE x | x | 0.26 | 0.28 | 0.32 | – | If=80mA |
| White CIE y | y | 0.26 | 0.28 | 0.32 | – | If=80mA |
4. Optical Characteristics
| 항목 | 기호 | Min | Typ | 최대 | 단위 | 조건 |
|---|---|---|---|---|---|---|
| 명암비 | CR | – | 500 | – | – | Normal angle |
| Luminance (Center) | Lv | 430 | 480 | – | cd/m² | |
| 밝기 균일성 | Δ화이트 | 80 | – | – | % | |
| 응답 시간(Tr+Tf) | – | – | 16 | – | ms | |
| 시야각(CR≥10) | ||||||
| – 3:00 / 9:00 | θ | – | 45 | – | 학위 | |
| – 6:00 | θ | – | 50 | – | 학위 | |
| – 12:00 | θ | – | 20 | – | 학위 | |
| NTSC 비율 | – | – | 55% | – | – |
5. Absolute Maximum Ratings
| 매개변수 | 기호 | Min | 최대 | 단위 |
|---|---|---|---|---|
| 공급 전압 | VDD | –0.3 | +4.6 | V |
| 로직 공급 전압 | VDDI | –0.3 | +4.6 | V |
| Input Voltage Range | VIN | –0.3 | VDDI+0.5 | V |
| Output Voltage Range | VO | –0.3 | VDDI+0.5 | V |
| 작동 온도 | Top | –20 | +70 | °C |
| 보관 온도 | Tst | –30 | +80 | °C |
6. Pin Description (40-pin FPC Connector)
| Pin(s) | 기호 | 설명 |
|---|---|---|
| 1 | GND | System Ground |
| 2 | LEDA | LED Anode (+) |
| 3–6 | LEDK1–LEDK4 | LED Cathodes (–) |
| 7–10 | XR, YU, XL, YD | Resistive Touch Panel (RTP) Pins |
| 11 | RESET | Reset Signal |
| 12 | VSYNC | Vertical Sync |
| 13 | HSYNC | Horizontal Sync |
| 14 | DOTCLK | Dot Clock |
| 15 | ENABLE | Data Enable |
| 16–21 | R0–R5 | Red Data (6-bit) |
| 22–27 | G0–G5 | Green Data (6-bit) |
| 28–33 | B0–B5 | Blue Data (6-bit) |
| 34–36 | SD0, SDI, SCL | Serial Interface Pins |
| 37 | CS | Chip Select |
| 38 | IOVCC | I/O Power (1.65–3.3V) |
| 39 | VCI | Analog Power (2.4–3.3V) |
| 40 | GND | System Ground |
7. Reliability & Inspection
-
Reliability Tests: High/Low temperature storage & operation, thermal shock, ESD (±6kV/±8kV).
-
Lifetime: 20,000 hours under normal operating conditions.
-
Inspection Standard: MIL-STD-105E, Level II, AQL: MAJ=0.65, MIN=1.5.
8. Key Features
-
Integrated 4-wire Resistive Touch Panel (RTP)
-
High brightness (480 cd/m²) and contrast (500:1)
-
RGB parallel interface for fast graphics rendering
-
6-bit color per channel (262K colors)
-
Robust TN panel with EWV polarizer
-
Compact module with built-in backlight driver
9. Applications
-
Human-Machine Interfaces (HMI)
-
Portable medical devices
-
산업용 제어 패널
-
Point-of-Sale (POS) terminals
-
Handheld test and measurement equipment
-
Interactive consumer electronics
기술 문서 다운로드
이 문서를 다운로드하려면 여기를 클릭하세요:FULL SPEC-JV028T1CSR-02B(02D)
All specifications are based on the official product specification sheet (Ver: 02). For mechanical drawings, touch panel performance details, and full inspection criteria, please refer to the original document.
최저가를 받으려면 즉시 상담하세요. 견적
24시간 이내에 견적을 제공해 드립니다.


