15.0‑inch XGA IPS TFT LCD Display Module – 1024×768, IPS Wide View (88°), 4:3 Aspect Ratio, LVDS Interface
- 15.0” XGA TFT – 1024×768 resolution, 4:3 aspect ratio, anti‑glare surface.
- IPS 广视角 – 88° all‑direction viewing with Normally Black technology.
- LVDS Interface – High‑speed differential signalling with 4 data lanes.
- 工业级 – -20°C to +70°C, 12V backlight with PWM dimming control.
15.0‑inch XGA IPS TFT LCD Display Module – 1024×768, IPS Wide View (88°), 4:3 Aspect Ratio, LVDS Interface
产品概览
This 15.0‑inch TFT LCD module delivers high‑quality XGA‑grade visuals at a resolution of 1024 × RGB × 768 经典画质 4:3 画面比例. 配备高速 LVDS 接口 with 4 data lanes, it enables low‑EMI, high‑bandwidth data transmission for demanding industrial, medical, and professional display applications.
该面板采用一种 通常为黑色,透射 带 IPS wide‑viewing technology (88°/88°/88°/88°), ,从几乎任何视角都能呈现出色的色彩还原度和对比度。一个 防眩光表面 可减少反光,从而在明亮环境下提高可读性。其有效面积为 304.1 × 228.1 mm, a robust 9.1 mm profile, and a wide operating temperature range (‑20°C 至 +70°C), this module is a premium choice for industrial HMIs, medical workstations, and professional display systems.
主要功能
- XGA resolution – 1024×768 for crisp, detailed visuals and sharp text
- 经典的 4:3 宽高比 – 工业和专业显示器的标准格式
- IPS 广视角 – 88° in all directions for consistent colour from any perspective
- LVDS 接口 – High‑speed differential signalling with low EMI and 4 data lanes
- 通常所说的“黑科技” – 更深的黑色和更出色的对比度
- 防眩光表面 – 减少反光,提升户外及强光环境下的可读性
- 大有效面积 – 304.1 × 228.1 mm for immersive viewing
- 12V LED backlight converter – Integrated backlight interface with enable and PWM dimming control
- 长寿命 LED 背光 – 典型寿命为 50,000 小时,通常为白色
- 温度范围广 – Operating: ‑20℃ to +70℃; Storage: ‑30℃ to +70℃
- 6‑bit / 8‑bit colour select – SEL68 pin for interface colour depth selection
- Reverse scan control – LR/UD pin for horizontal/vertical scan direction selection
- 无触摸屏 – 专注于纯粹的显示性能
技术规格
一般规格
| 显示屏尺寸 | 15.0 inch (diagonal) |
| 决议 | 1024 × RGB × 768 dots (XGA) |
| 液晶类型 | TFT,常黑型,透射式 |
| 视角 | 88°/88°/88°/88° (IPS) |
| 宽高比 | 4:3 |
| 界面 | LVDS |
| 背光 | LED,常亮白光 |
| 触控屏 | 无触摸屏 |
| 表面处理 | 防眩光 |
机械尺寸
| 模块尺寸 | 326.5 (W) × 253.5 (H) × 9.1 (D) mm |
| 活动区域 | 304.1 (W) × 228.1 (H) mm |
| 像素间距 | 0.297 × 0.297 毫米 |
绝对最大额定值
| 参数 | 符号 | 最小 | 最大 | 单位 |
|---|---|---|---|---|
| 工作温度 | 返回顶部 | -20 | +70 | ℃ |
| 存储温度 | TST | -30 | +70 | ℃ |
电气特性(TFT LCD 模块)
| 参数 | 符号 | 最小 | 类型 | 最大 | 单位 |
|---|---|---|---|---|---|
| 电源电压 | VCC | 3.0 | 3.3 | 3.6 | V |
| Ripple Voltage | VRP | – | – | 100 | mVp‑p |
| 浪涌电流 | INRUSH | – | – | 2.0 | A |
| Supply Current (White) | ICC | – | 550 | 660 | 毫安 |
| Supply Current (Black) | ICC | – | 440 | 530 | 毫安 |
| LVDS Differential Input Voltage | Vdd | 200 | – | 600 | mV |
| LVDS Common Input Voltage | Vcc | 1.0 | 1.2 | 1.4 | V |
| LVDS “H” Level Threshold | VH | – | – | 100 | mV |
| LVDS “L” Level Threshold | VL | -100 | – | – | mV |
| Terminating Resistor | RT | – | 100 | – | Ohm |
LED背光驱动条件
有关背光驱动参数的详细信息,请参阅完整的规格说明书。.
接口引脚定义
LCD Interface (20‑pin)
该模块使用一个 LVDS 接口 with 4 data lanes and differential clock.
| 针脚编号. | 符号 | 功能 |
|---|---|---|
| 1‑2 | VCC | Power supply +3.3V (typical) |
| 3 | 北卡罗来纳州 | No connection (reserved) |
| 4 | LR/UD | Reverse scan control: H/NC = Normal, L = Reverse scan |
| 5‑6 | RX0- / RX0+ | LVDS data lane 0 differential pair |
| 7 | 接地 | 地面 |
| 8‑9 | RX1- / RX1+ | LVDS data lane 1 differential pair |
| 10 | 北卡罗来纳州 | No connection (reserved) |
| 11‑12 | RX2- / RX2+ | LVDS data lane 2 differential pair |
| 13 | 接地 | 地面 |
| 14‑15 | RXCLK- / RXCLK+ | LVDS clock differential pair |
| 16 | 接地 | 地面 |
| 17‑18 | RX3- / RX3+ | LVDS data lane 3 differential pair |
| 19 | 北卡罗来纳州 | No connection (reserved) |
| 20 | SEL68 | 6/8‑bit select: High = 6‑bit, Low/NC = 8‑bit |
Backlight Unit Converter Connector (5‑pin)
The backlight converter uses a separate 5‑pin connector with 12V input, enable, and PWM dimming control.
| 针脚 | 符号 | 说明 |
|---|---|---|
| 1 | Vi | Converter input voltage (12V) |
| 2 | 接地 | Converter ground |
| 3 | EN | Enable pin (3.3V logic) |
| 4 | Dimming | Backlight adjust (PWM dimming: Hi = 3.3VDC, Lo = 0VDC) |
| 5 | 北卡罗来纳州 | 无连接 |
典型应用
This large‑format, high‑performance display module is ideal for:
- 工业人机界面 – Large operator panels, control terminals, and process monitoring systems
- 医疗设备 – Diagnostic workstations, patient monitors, and medical imaging displays
- 数字标牌 – 广告展示屏、信息亭和公共信息系统
- ATM & KIOSK – Self‑service terminals, banking machines, and ticketing systems
- Electronic whiteboards – Interactive displays and collaboration tools
- 测试与测量 – 示波器、频谱分析仪和数据采集系统
请注意: 4:3 横向布局是固定的。如需纵向布局,请咨询我们的技术支持团队以获取其他方案。.
为什么选择本模块?
- XGA‑grade resolution – 1024×768 delivers crisp, detailed images suitable for professional and industrial applications requiring high information density.
- 经典 4:3 格式 – The standard aspect ratio for many industrial, medical, and professional display systems.
- 超宽视角 IPS 显示屏 – 88° in all directions ensures consistent colour and contrast from any perspective.
- LVDS 接口 – High‑speed differential signalling with low EMI and excellent noise immunity.
- 防眩光表面 – 减少反光,在光线强烈的环境中提供更清晰的视野。.
- Integrated backlight converter interface – 12V input with enable and PWM dimming control simplifies system design.
- Flexible scan and colour control – LR/UD and SEL68 pins for scan direction and colour depth selection.
- 质量有保障 – 在通过ISO9001/ISO14001认证的工厂生产。.
订购信息
| 订单编号 | 说明 |
|---|---|
| 15.0‑TFT‑LVDS‑XGA | 15.0‑inch TFT module, 1024×768 XGA, IPS wide view (88°), 4:3 aspect ratio, LVDS interface, anti‑glare, no touch |
如需了解批量采购价格、索取样品或获取技术图纸,请直接联系我们的销售团队。.
所有规格如有变更,恕不另行通知。色调可能会因温度和驱动电压的不同而略有差异。.
立即咨询,以获得最低价格 报价
我们将在 24 小时内为您提供报价。.


