3.5 Inch TFT LCD Module 320×480 RGB

Build reliable HMIs with the JicTech 3.5″ TFT LCD Module. Featuring 320×480 resolution, 300 cd/m² brightness, 18‑bit RGB interface, and ultra‑thin 2.35mm profile, it delivers crisp 16.7M colors. ADS wide‑view technology, 500:1 contrast, and 69% NTSC. データシート、サンプル、ボリューム価格については、JicTechまでお問い合わせください。.


概要

The JicTech RT035T8T-R3 is a compact 3.5‑inch TFT LCD module designed for cost‑effective industrial and consumer applications that require reliable performance and easy integration. Built on an ADS (IPS‑type) panel (normally white), it offers 320×RGB×480 pixel resolution, 16.7M colors, and a 12 o’clock optimal viewing direction with wide‑angle performance. The 18‑bit RGB parallel interface allows simple connection to a wide range of processors. With 300 cd/m² brightness and a slim 2.35mm thickness, this module is ideal for handheld devices, medical equipment, portable terminals, and industrial control panels.

主な特徴

  • 3.5” diagonal ADS (IPS‑type) panel – 12 o’clock best viewing direction, wide angle
  • 320×480 resolution – sharp HVGA, 16.7M colors
  • モジュールサイズ – 55.04 × 84.71 × 2.35 mm (W×H×T)
  • アクティブエリア – 48.96 × 73.44 mm
  • 18‑bit RGB parallel interface – flexible, easy to integrate
  • 明るさ – 300 cd/m² typical – readable indoors
  • Contrast ratio – 500:1 typical
  • 応答時間 – 35ms typical (Tr+Tf)
  • 色域 – 69% NTSC typical
  • 広い動作温度 - 20℃〜+70
  • バックライト – 6 white LEDs (series), 20mA total current
  • ドライバーIC – ILI9488 (well‑supported, mature)
  • RoHS対応

アプリケーション

  • Portable medical devices (patient monitors, diagnostic tools)
  • 産業用HMIおよびコントロールパネル
  • Handheld test & measurement equipment
  • スマートホームゲートウェイ&セキュリティパネル
  • 車載用補助ディスプレイ
  • Consumer electronics with compact form factor

技術仕様

一般仕様

パラメータ価値
LCDサイズ3.5インチ
パネルタイプa-Si TFT active matrix, ADS (IPS-type, Normally White)
決議320 (RGB) × 480 pixels
表示モードNormally White / Transmissive
色数16.7M(各色8ビット)
視聴方向12時方向(ベストビュー)
コントラスト比500 : 1 (typical)
輝度(明るさ)300 cd/m²(代表値)
モジュールサイズ(W×H×T)55.04 × 84.71 × 2.35 mm
アクティブエリア(W×H)48.96 × 73.44 mm
ピクセルピッチ0.153 × 0.153 mm
ドライバーICILI9488
インターフェース18‑bit RGB (parallel, 18-bit bus)
バックライト6 white LEDs (series connection)
動作温度-20 ~ +70 °C
保存温度-30 ~ +80 °C

絶対最大定格

パラメータシンボル最小マックス単位
動作温度トップ-20+70°C
保存温度Tst-30+80°C
湿度RH-90(60℃の場合)%

DC Characteristics (Ta=25°C)

パラメータシンボル最小タイプマックス単位
ロジック電源電圧VCC/VCI2.52.83.6V
I/O電源IOVCC2.52.83.6V
入力電流イド-2733mA
入力高電圧VIH0.7×IOVCC-IOVCCV
入力低電圧ヴィルブイエスエス-0.3×IOVCCV

Backlight Characteristics (Ta=25°C, constant current)

パラメータシンボル最小タイプマックス単位コンディション
順電圧Vf18.019.220.4Vもし=20mAなら
LED currentもし-20-mA定電流

Optical Characteristics (Ta=25°C, If=20mA)

Contrast RatioCRNormal angle-500–

項目シンボルコンディション最小タイプマックス単位
Luminance (center)LVノーマルアングル-300-cd/m²
輝度均一性δホワイト-80--%
応答時間(Tr+Tf)-TC=25°C-35-ms
視野角 (3:00)θCR≧10-70-デグ
視野角 (9:00)θCR≧10-70-デグ
視野角 (6:00)θCR≧10-60-デグ
視野角 (12:00)θCR≧10-40-デグ
白色 CIE (x,y)Wx, Wyノーマルアングル0.255,0.253-0.377,0.378-
NTSC比S--69%-%

Interface Pin Connection (parallel RGB)

ピン番号.シンボル入出力説明
1BLKPバックライト陰極
2BLAPバックライト陽極
4GNDPシステム・グラウンド
5ブイシーシーPAnalog power supply (2.5~3.3V)
6IOVCCPI/O power supply (2.5~3.3V)
7-9IM2-IM0IInterface mode select (101 for SPI+RGB 18-bit)
10TEOティアリング効果出力
11エスディーオーOSPI data out
12SDIISPI data in
13D/CIデータ/コマンド選択
14WR/SCLIWrite strobe / SPI clock
15RDIRead strobe
16CSIチップ・セレクト(アクティブ・ロー)
17リセットIリセット(アクティブ・ロー)
24-41D17-D0入出力18‑bit RGB data bus (D17 to D0)
42DEIデータイネーブル(アクティブハイ)
43PCLKIPixel clock
44ハイシンクI水平同期(負極性)
45垂直同期I垂直同期(負極性)

Full 45‑pin pinout including NC pins available in the datasheet. Interface mode is set by IM2-IM0 (default SPI+RGB 18-bit).

信頼性と品質保証

信頼性試験項目(合格基準)

  • High temperature storage: 80℃, 24H
  • Low temperature storage: -30℃, 24H
  • High temperature operation: 70℃, 24H
  • Low temperature operation: -20℃, 24H
  • Temperature cycle (non‑operation): -20℃ ↔ 70℃, 30min each, 5 cycles
  • Damp proof test: 60℃ / 90% RH, 12H
  • Mechanical vibration: 10Hz~55Hz~10Hz, 1.5mm, X/Y/Z, 0.5H (packed)
  • Drop test: 1.0m height, one time each side (packed)
  • ESD test: Air ±8kV / Contact ±4kV, 330Ω/150pF, 10 times each

失敗の判定 No display defects, no glass crack, current Idd < 2x initial value, contrast ratio ≥50% of initial, and full electrical/optical functionality.

品質保証 (GB2828 / MIL-STD-105E 相当)

  • 検査レベル一般II、シングルサンプリング
  • 主要欠陥AQL0.065
  • 軽微な欠陥 AQL0.065
  • Inspection conditions: distance 250mm, temperature 25±5°C, angle 45°

取り扱い・保管上の注意

  • ガラスパネルは壊れやすいので、機械的な衝撃や落下を避けてください。.
  • LCD液が漏れた場合は、直ちに皮膚や衣服を石鹸と水で洗うこと。.
  • 作業台は接地し、取り扱いや保管には静電気防止バッグを使用する。.
  • 保管0~35℃、40~60% RH、密閉ポリエチレン袋、直射日光を避けてください。.
  • Hand soldering: use grounded iron, avoid flux spatters on display area.
  • モジュールを分解または改造しないでください - 保証は無効です。.

Packing Method

モジュールは静電気防止トレイに入れられ、発泡保護材で積み重ねられ、段ボールで固定され、カートンで密封される。ご要望に応じて、詳細な梱包図面をご提供いたします。.

ご注文とサポート

The JicTech RT035T8T-R3 is available for engineering samples and mass production. For a complete datasheet, 2D drawing, or a quotation, please contact our B2B sales team.

Download product specification document: FULL SPEC-RT035T8T-R3

📩 見積もりまたはサンプルのご依頼は、Eメールまたは下記のお問い合わせフォームをご利用ください。.

最安値で購入するためにすぐに相談する 引用

24時間以内にお見積もりいたします。.