3.5 Inch TFT LCD Module 320×480 RGB
Build reliable HMIs with the JicTech 3.5″ TFT LCD Module. Featuring 320×480 resolution, 300 cd/m² brightness, 18‑bit RGB interface, and ultra‑thin 2.35mm profile, it delivers crisp 16.7M colors. ADS wide‑view technology, 500:1 contrast, and 69% NTSC. データシート、サンプル、ボリューム価格については、JicTechまでお問い合わせください。.
概要
The JicTech RT035T8T-R3 is a compact 3.5‑inch TFT LCD module designed for cost‑effective industrial and consumer applications that require reliable performance and easy integration. Built on an ADS (IPS‑type) panel (normally white), it offers 320×RGB×480 pixel resolution, 16.7M colors, and a 12 o’clock optimal viewing direction with wide‑angle performance. The 18‑bit RGB parallel interface allows simple connection to a wide range of processors. With 300 cd/m² brightness and a slim 2.35mm thickness, this module is ideal for handheld devices, medical equipment, portable terminals, and industrial control panels.
主な特徴
- 3.5” diagonal ADS (IPS‑type) panel – 12 o’clock best viewing direction, wide angle
- 320×480 resolution – sharp HVGA, 16.7M colors
- モジュールサイズ – 55.04 × 84.71 × 2.35 mm (W×H×T)
- アクティブエリア – 48.96 × 73.44 mm
- 18‑bit RGB parallel interface – flexible, easy to integrate
- 明るさ – 300 cd/m² typical – readable indoors
- Contrast ratio – 500:1 typical
- 応答時間 – 35ms typical (Tr+Tf)
- 色域 – 69% NTSC typical
- 広い動作温度 - 20℃〜+70
- バックライト – 6 white LEDs (series), 20mA total current
- ドライバーIC – ILI9488 (well‑supported, mature)
- RoHS対応
アプリケーション
- Portable medical devices (patient monitors, diagnostic tools)
- 産業用HMIおよびコントロールパネル
- Handheld test & measurement equipment
- スマートホームゲートウェイ&セキュリティパネル
- 車載用補助ディスプレイ
- Consumer electronics with compact form factor
技術仕様
一般仕様
| パラメータ | 価値 |
|---|---|
| LCDサイズ | 3.5インチ |
| パネルタイプ | a-Si TFT active matrix, ADS (IPS-type, Normally White) |
| 決議 | 320 (RGB) × 480 pixels |
| 表示モード | Normally White / Transmissive |
| 色数 | 16.7M(各色8ビット) |
| 視聴方向 | 12時方向(ベストビュー) |
| コントラスト比 | 500 : 1 (typical) |
| 輝度(明るさ) | 300 cd/m²(代表値) |
| モジュールサイズ(W×H×T) | 55.04 × 84.71 × 2.35 mm |
| アクティブエリア(W×H) | 48.96 × 73.44 mm |
| ピクセルピッチ | 0.153 × 0.153 mm |
| ドライバーIC | ILI9488 |
| インターフェース | 18‑bit RGB (parallel, 18-bit bus) |
| バックライト | 6 white LEDs (series connection) |
| 動作温度 | -20 ~ +70 °C |
| 保存温度 | -30 ~ +80 °C |
絶対最大定格
| パラメータ | シンボル | 最小 | マックス | 単位 |
|---|---|---|---|---|
| 動作温度 | トップ | -20 | +70 | °C |
| 保存温度 | Tst | -30 | +80 | °C |
| 湿度 | RH | - | 90(60℃の場合) | % |
DC Characteristics (Ta=25°C)
| パラメータ | シンボル | 最小 | タイプ | マックス | 単位 |
|---|---|---|---|---|---|
| ロジック電源電圧 | VCC/VCI | 2.5 | 2.8 | 3.6 | V |
| I/O電源 | IOVCC | 2.5 | 2.8 | 3.6 | V |
| 入力電流 | イド | - | 27 | 33 | mA |
| 入力高電圧 | VIH | 0.7×IOVCC | - | IOVCC | V |
| 入力低電圧 | ヴィル | ブイエスエス | - | 0.3×IOVCC | V |
Backlight Characteristics (Ta=25°C, constant current)
| パラメータ | シンボル | 最小 | タイプ | マックス | 単位 | コンディション |
|---|---|---|---|---|---|---|
| 順電圧 | Vf | 18.0 | 19.2 | 20.4 | V | もし=20mAなら |
| LED current | もし | - | 20 | - | mA | 定電流 |
Optical Characteristics (Ta=25°C, If=20mA)
Contrast RatioCRNormal angle-500–
| 項目 | シンボル | コンディション | 最小 | タイプ | マックス | 単位 |
|---|---|---|---|---|---|---|
| Luminance (center) | LV | ノーマルアングル | - | 300 | - | cd/m² |
| 輝度均一性 | δホワイト | - | 80 | - | - | % |
| 応答時間(Tr+Tf) | - | TC=25°C | - | 35 | - | ms |
| 視野角 (3:00) | θ | CR≧10 | - | 70 | - | デグ |
| 視野角 (9:00) | θ | CR≧10 | - | 70 | - | デグ |
| 視野角 (6:00) | θ | CR≧10 | - | 60 | - | デグ |
| 視野角 (12:00) | θ | CR≧10 | - | 40 | - | デグ |
| 白色 CIE (x,y) | Wx, Wy | ノーマルアングル | 0.255,0.253 | - | 0.377,0.378 | - |
| NTSC比 | S | - | - | 69% | - | % |
Interface Pin Connection (parallel RGB)
| ピン番号. | シンボル | 入出力 | 説明 |
|---|---|---|---|
| 1 | BLK | P | バックライト陰極 |
| 2 | BLA | P | バックライト陽極 |
| 4 | GND | P | システム・グラウンド |
| 5 | ブイシーシー | P | Analog power supply (2.5~3.3V) |
| 6 | IOVCC | P | I/O power supply (2.5~3.3V) |
| 7-9 | IM2-IM0 | I | Interface mode select (101 for SPI+RGB 18-bit) |
| 10 | TE | O | ティアリング効果出力 |
| 11 | エスディーオー | O | SPI data out |
| 12 | SDI | I | SPI data in |
| 13 | D/C | I | データ/コマンド選択 |
| 14 | WR/SCL | I | Write strobe / SPI clock |
| 15 | RD | I | Read strobe |
| 16 | CS | I | チップ・セレクト(アクティブ・ロー) |
| 17 | リセット | I | リセット(アクティブ・ロー) |
| 24-41 | D17-D0 | 入出力 | 18‑bit RGB data bus (D17 to D0) |
| 42 | DE | I | データイネーブル(アクティブハイ) |
| 43 | PCLK | I | Pixel clock |
| 44 | ハイシンク | I | 水平同期(負極性) |
| 45 | 垂直同期 | I | 垂直同期(負極性) |
Full 45‑pin pinout including NC pins available in the datasheet. Interface mode is set by IM2-IM0 (default SPI+RGB 18-bit).
信頼性と品質保証
信頼性試験項目(合格基準)
- High temperature storage: 80℃, 24H
- Low temperature storage: -30℃, 24H
- High temperature operation: 70℃, 24H
- Low temperature operation: -20℃, 24H
- Temperature cycle (non‑operation): -20℃ ↔ 70℃, 30min each, 5 cycles
- Damp proof test: 60℃ / 90% RH, 12H
- Mechanical vibration: 10Hz~55Hz~10Hz, 1.5mm, X/Y/Z, 0.5H (packed)
- Drop test: 1.0m height, one time each side (packed)
- ESD test: Air ±8kV / Contact ±4kV, 330Ω/150pF, 10 times each
失敗の判定 No display defects, no glass crack, current Idd < 2x initial value, contrast ratio ≥50% of initial, and full electrical/optical functionality.
品質保証 (GB2828 / MIL-STD-105E 相当)
- 検査レベル一般II、シングルサンプリング
- 主要欠陥AQL0.065
- 軽微な欠陥 AQL0.065
- Inspection conditions: distance 250mm, temperature 25±5°C, angle 45°
取り扱い・保管上の注意
- ガラスパネルは壊れやすいので、機械的な衝撃や落下を避けてください。.
- LCD液が漏れた場合は、直ちに皮膚や衣服を石鹸と水で洗うこと。.
- 作業台は接地し、取り扱いや保管には静電気防止バッグを使用する。.
- 保管0~35℃、40~60% RH、密閉ポリエチレン袋、直射日光を避けてください。.
- Hand soldering: use grounded iron, avoid flux spatters on display area.
- モジュールを分解または改造しないでください - 保証は無効です。.
Packing Method
モジュールは静電気防止トレイに入れられ、発泡保護材で積み重ねられ、段ボールで固定され、カートンで密封される。ご要望に応じて、詳細な梱包図面をご提供いたします。.
ご注文とサポート
The JicTech RT035T8T-R3 is available for engineering samples and mass production. For a complete datasheet, 2D drawing, or a quotation, please contact our B2B sales team.
Download product specification document: FULL SPEC-RT035T8T-R3
📩 見積もりまたはサンプルのご依頼は、Eメールまたは下記のお問い合わせフォームをご利用ください。.
最安値で購入するためにすぐに相談する 引用
24時間以内にお見積もりいたします。.


