7.0‑inch TFT LCD Module – 1024×600 Display

Détails du produit et spécifications techniques

Vue d'ensemble
The RT070T16I-L1-B is a 7.0-inch color TFT LCD module with a 16:9 aspect ratio, offering WSVGA resolution and wide viewing angles. It utilizes a normally black transmissive panel with RGB vertical stripe arrangement, ensuring vivid color reproduction and consistent performance across varied environments.

Caractéristiques principales

High resolution: 1024 × 600 pixels (WSVGA)
Wide viewing angle: 85° left/right/up/down
High contrast ratio: 800 (typical)
Brightness: 320 cd/m² (typical)
24-bit RGB interface with DE/SYNC mode selection
Slim design: 2.6 mm thickness
Industrial operating temperature: –20°C to +70°C

Applications

Industrial control panels and HMIs
Medical monitoring devices
Automotive infotainment systems
Portable multimedia players
Instrumentation and test equipment
Digital signage and kiosks

Paramètres techniques

Paramètres	Spécifications	Notes
Affichage
Taille de l'écran LCD	7.0 inches (diagonal)	16:9 aspect ratio
Type de panneau	a-Si TFT, Normally Black	Transmissive
Résolution	1024 × 600 pixels (WSVGA)
Pixel Arrangement	RGB vertical stripe
Hauteur du pixel	0.1506 mm (H) × 0.1432 mm (V)
Zone active	154.2144 mm × 85.92 mm
Nombre de couleurs	16.7M	8-bit per color
Angle de vision (L/R/U/D)	85°/85°/85°/85°	CR ≥ 10
Rapport de contraste	560 (Min), 800 (Typ)
Luminance	280 cd/m² (Min), 320 cd/m² (Typ)	@ 180 mA
Response Time (Rise + Fall)	30 ms (Typ), 40 ms (Max)
NTSC Color Gamut	45% (Min), 50% (Typ)
White Chromaticity (CIE1931)	Wx: 0.265, Wy: 0.243	±0.05 tolerance
Électricité
Supply Voltage (DVDD)	3.0V – 3.3V – 3.6V
Gate ON Voltage (VGH)	17.7V – 18V – 18.3V
Gate OFF Voltage (VGL)	–6.6V – –6.0V – –5.4V
Analog Supply (AVDD)	9.2V – 9.6V – 10.0V
Common Voltage (VCOM)	3.20V – 3.70V – 4.20V	Adjustable
Input Current (IDD)	16 mA (Typ), 28 mA (Max)
Interface	24-bit RGB parallel	DE or HV sync mode
Mécanique
Dimensions du module	164.0 mm × 97.0 mm × 2.6 mm
Connector	FPC, 50-pin (Hirose FH12A-50S-0.5SH)
Rétro-éclairage
LED Configuration	White LEDs
Drive Current	180 mA (for luminance measurement)
Environnement
Température de fonctionnement	De -20°C à +70°C
Température de stockage	De -30°C à +80°C
Operating Humidity	10% to 90% RH (non-condensing)	≤60°C
Reliability
High Temp Operation	70°C, 120 hrs
High Temp Storage	80°C, 120 hrs
High Humidity Operation	60°C, 90% RH, 120 hrs
Low Temp Operation	–20°C, 120 hrs
Low Temp Storage	–30°C, 120 hrs
Garantie	3 months from shipment	Under normal use

Informations complémentaires

Interface Options: Supports both DE (Data Enable) and HV (H/VSYNC) synchronization modes via MODE pin selection.
Scan Direction Control: Configurable via U/D and L/R pins for flexible display orientation.
Power Sequence: Follows specified power-on/off timing to ensure stable operation and longevity.
Dithering Function: Optional internal dithering controlled via DITHB pin for enhanced color gradation.
Montage : Designed for secure integration with recommended mounting practices to avoid mechanical stress.
Compliance: Suitable for industrial and commercial applications; not intended for aerospace, submarine, nuclear, or life-support systems without prior consultation.

Le présent Module LCD TFT from JicTech combines a large-format high-resolution display with reliable performance and flexible integration options, making it an ideal choice for advanced visual systems requiring clarity, durability, and ease of use.

Télécharger les documents techniques

Cliquez ici pour télécharger ce document：FULL SPEC-RT070T16I-L1-B

Toutes les spécifications sont basées sur la fiche officielle de spécification du produit (Ver : 01). Pour les dessins mécaniques, les diagrammes de synchronisation des signaux et les critères d'inspection complets, veuillez vous référer au document original.