9.99‑inch TFT LCD Module – 1280×480 Display

Product Details: JicTech 9.99‑Inch TFT LCD Module

개요

The RV09917BSL‑1A is a high‑brightness, high‑resolution TFT LCD module designed for applications requiring excellent visibility in various lighting conditions. Utilizing an IPS (In‑Plane Switching) panel, it offers consistent color and contrast across wide viewing angles. The module integrates the ST77031 driver IC, supports 24‑bit color depth (16.7 million colors), and is powered by a high‑efficiency LED backlight system. Its compact yet rugged design makes it ideal for automotive displays, industrial HMIs, and outdoor equipment.

주요 기능

High Brightness: 1000 cd/m² typical luminance for sunlight readability.
IPS 기술: Wide viewing angle (85° typical in all directions) with excellent color consistency.
고해상도: 720 (RGB) × 1600 pixels for sharp text and graphics.
MIPI Interface: 4‑lane MIPI DSI interface for high‑speed data transmission.
넓은 온도 범위: Operating from ‑30°C to +80°C, suitable for harsh environments.
Robust Construction: Metal frame, reinforced PCB, and reliable connector design.
Long LED Life: Backlight LED lifetime up to 20,000 hours (to 50% brightness).
RoHS 준수: Environmentally friendly manufacturing.

애플리케이션

Truck/RV rearview camera displays
Automotive infotainment & instrument clusters
Industrial control panels & HMIs
Outdoor monitoring equipment
Medical displays & portable devices

기술 사양

카테고리	매개변수	사양	단위	조건 / 참고 사항
일반	모델 이름	RV09917BSL‑1A	–	–
	디스플레이 유형	IPS TFT LCD	–	Normally Black, Transmissive
	화면 크기	9.99	인치	–
	해상도	720 (RGB) × 1600	Pixels	–
	활성 영역	106.92 × 237.60	mm	–
	픽셀 피치	0.06 × 0.18	mm	RGB 세로 줄무늬
	개요 치수	145.0 × 345.0 × 7.77	mm	–
	방향 보기	Full (All‑around)	–	–
전기	Supply Voltage (VDD)	2.8 – 3.6 (Typ. 3.3)	V	For LCD logic
	I/O 전압(IOVCC)	1.6 – 3.6 (Typ. 1.8)	V	For interface logic
	입력 하이 레벨(VIH)	0.7 × IOVCC - IOVCC	V	–
	입력 저레벨(VIL)	VSS to 0.3 × IOVCC	V	–
백라이트	LED Forward Voltage (VF)	16.2 – 19.2 (Typ. 18)	V	–
	LED Forward Current (IF)	Typ. 360	mA	정전류 드라이브
	휘도	Typ. 1000	cd/m²	Center, white screen
	LED 수명	Min. 20,000	Hours	To 50% initial luminance
광학	명암비	Min. 700, Typ. 1000	–	@ normal angle
	휘도 균일성	Min. 80%, Typ. 90%	%	–
	응답 시간(Tr+Tf)	Typ. 30, 최대. 40	ms	–
	시야각(CR>10)	Typ. 85° (all directions)	학위	3, 6, 9, 12 o’clock
	White Chromaticity (CIE1931)	x: 0.298±0.03, y: 0.338±0.03	–	–
	색재현율(NTSC)	Min. 55%, Typ. 65%	%	–
인터페이스	디스플레이 인터페이스	MIPI DSI 4레인	–	–
	커넥터	40‑pin FPC (0.5 mm pitch)	–	–
	드라이버 IC	ST77031	–	–
환경	작동 온도	-30 ~ +80	°C	–
	보관 온도	-30 ~ +80	°C	–
	작동 습도	최대 90% RH(최대 60°C)	%RH	비응축
신뢰성	High‑Temp Storage Test	+80°C, 48 hours	–	IEC 60068‑2‑2
	Low‑Temp Storage Test	‑30°C, 48 hours	–	IEC 60068‑2‑1
	Temperature Cycle	‑20°C ↔ +70°C, 5 cycles	–	IEC 60068‑2‑14
	Vibration Test	10‑55 Hz, 1.5 mm, 6 hours	–	IEC 60068‑2‑6
	Shock Test	60G, 6 ms, each direction	–	IEC 60068‑2‑27
	ESD Protection (Operating)	±8 kV (Air), ±4 kV (Contact)	–	IEC 61000‑4‑2

Pinout & Interface (40‑pin FPC)

핀	기호	설명	핀	기호	설명
1	NC	연결 없음	21	MIPI_D3+	MIPI Data3 positive
2	VDD	LCD power (2.8V)	22	GND	Ground
3	IOVCC	I/O power (1.8V)	23‑24	NC	연결 없음
4	GND	Ground	25	GND	Ground
5	RESET	Reset signal input	26‑29	NC	연결 없음
6	NC	연결 없음	30	GND	Ground
7	GND	Ground	31‑32	VLED‑	LED backlight cathode
8	MIPI_D0‑	MIPI Data0 negative	33‑38	NC	연결 없음
9	MIPI_D0+	MIPI Data0 positive	39‑40	VLED+	LED backlight anode
10	GND	Ground	…	…	…
11	MIPI_D1‑	MIPI Data1 negative
12	MIPI_D1+	MIPI Data1 positive
13	GND	Ground
14	MIPI_CLK‑	MIPI clock negative
15	MIPI_CLK+	MIPI clock positive
16	GND	Ground
17	MIPI_D2‑	MIPI Data2 negative
18	MIPI_D2+	MIPI Data2 positive
19	GND	Ground
20	MIPI_D3‑	MIPI Data3 negative

Timing Characteristics (Typical)

Pixel Clock (DCLK): 80 MHz
Horizontal Display: 720 clocks
Vertical Display: 1600 lines
Sync Pulses: HSYNC = 20 clocks, VSYNC = 10 lines
Porches: HBP=60, HFP=60, VBP=20, VFP=20

품질 및 검사 기준

결함 분류: Major (AQL 0.4) and Minor (AQL 0.65) per GB/T 2828.1.
Viewing Zones: A‑zone (active area) and B‑zone (periphery) with defined defect limits.
검사 조건: 300 mm distance, 45° viewing angle, 25±5°C ambient.
Reliability Compliance: All tests follow IEC 60068 series standards.

Handling & Safety Notes

Avoid mechanical shock, bending, or pressure on the active area.
Use proper ESD precautions during installation.
Clean only with isopropyl or ethyl alcohol; avoid ketones and aromatic solvents.
Store in anti‑static bags, 0‑35°C, 40‑60% RH, away from direct light.

패키지 포함 사항

9.99‑inch TFT LCD module (RV09917BSL‑1A)
40핀 FPC 케이블 연결
Basic mechanical drawing and interface specification

주문 정보

Model: RV09917BSL‑1A
Specification Version: 01
Backlight: White LED, 18V typical
Customization: Available for volume orders (mounting, connector, backlight tuning)

Note: Specifications are based on datasheet Ver. 01 and subject to change without notice. For OEM customization, reliability requirements, or design‑in support, please contact JicTech technical sales.