5.0 Inch TFT LCD Module 800×480 MIPI

で産業用HMIを向上させます。 JicTech 5.0″ IPS TFT LCD Module. Featuring 800×480 resolution, 800 cd/m² ultra‑high brightness, 4‑lane MIPI interface, and integrated 5‑point capacitive touch (G+G, GT911), it delivers vivid visuals and responsive touch. Ultra‑wide 85° viewing angles and 16.7M colors. データシート、サンプル、ボリューム価格については、JicTechまでお問い合わせください。.


概要

The JicTech RH50I5XSC-H3 is a high‑brightness 5.0‑inch TFT LCD module designed for industrial and automotive applications demanding excellent sunlight readability and robust touch interaction. Built on an IPS panel (normally black), it offers 800×RGB×480 pixel resolution, 16.7M true colors, and 85° ultra‑wide viewing angles in all directions. The 4‑lane MIPI DSI interface ensures high‑speed video transmission with low EMI, while the 800 cd/m² backlight provides outstanding outdoor visibility. An integrated capacitive touch panel (G+G, 5‑point multi‑touch, GT911 controller, I²C interface) delivers precise, glove‑friendly operation. With a slim 4.92mm overall profile (including cover lens), this module is ideal for industrial HMIs, medical devices, automotive displays, and portable instruments.

主な特徴

  • 5.0” diagonal IPS panel – 85° viewing angles (left/right/up/down)
  • 800×480 resolution – sharp WVGA, 16.7M colors
  • Overall module size (with CTP) – 135.0 × 91.8 × 4.92 mm (W×H×T)
  • LCM size (without CTP) – 120.7 × 75.8 × 2.95 mm
  • アクティブエリア – 108.0 × 64.8 mm (estimated based on pixel pitch 0.08625mm)
  • 4レーンMIPI DSIインターフェース – high‑speed, low EMI
  • Ultra‑high brightness – 800 cd/m² typical (750 min) – excellent for outdoor/sunlight
  • 高コントラスト比 – 900:1 typical (600 min)
  • 応答時間 – 30ms typical (Tr+Tf)
  • Capacitive touch panel – G+G, 5‑point multi‑touch, GT911 controller, I²C interface
  • Cover lens – Toughened glass, 3.3V touch power supply
  • 広い動作温度 - 20℃〜+70
  • バックライト – 28 white LEDs (4S7P), 140mA total current
  • LED lifetime – 20,000~50,000 hours (to 50% degradation)
  • ドライバーIC – ST7262 (TFT) + GT911 (CTP)
  • RoHS対応

アプリケーション

  • 産業用HMIおよびコントロールパネル
  • 医療診断機器および患者モニター
  • 車載インフォテインメント&クラスターディスプレイ
  • ポータブル試験・測定機器
  • Outdoor kiosks & POS terminals
  • Marine and rugged electronics

技術仕様

一般仕様

パラメータ価値
LCDサイズ5.0 inch
パネルタイプa-Si TFTアクティブマトリックス、IPS(ノーマリーブラック)
決議800 (RGB) × 480 pixels
表示モードIPS/ノーマリーブラック
色数16.7M(各色8ビット)
視聴方向All o’clock (85° typical, CR≥10)
コントラスト比900 : 1 (typical), 600 : 1 (min)
輝度(明るさ)800 cd/m² (typical), 750 cd/m² (min)
Outline Size (with CTP)135.0 × 91.8 × 4.92 mm
LCM Size (without CTP)120.7 × 75.8 × 2.95 mm
アクティブエリア(W×H)108.0 × 64.8 mm (approx.)
ピクセルピッチ0.08625 × 0.08625 mm
ディスプレイ・インターフェース4‑lane MIPI DSI
タッチインターフェースI²C (3.3V, SCL/SDA)
Touch Panel TypeCapacitive, G+G, 5‑point multi‑touch
カバーレンズ材質Toughened glass
TFT Driver ICST7262
CTPドライバICGT911
バックライト28 white LEDs (4 series × 7 parallel)
LCM VCC3.3V (typ)
IOVCC (I/O)1.8V (typ)
Touch VCC3.3V
動作温度-20 ~ +70 °C
保存温度-30 ~ +80 °C

絶対最大定格

パラメータシンボル最小マックス単位
動作温度トップ-20+70°C
保存温度Tst-30+80°C
湿度RH-90(60℃の場合)%

DC Characteristics (Ta=25°C)

パラメータシンボル最小タイプマックス単位
LCM supply voltageブイシーシー2.53.33.6V
LCM I/O supply voltageIOVCC1.651.82.0V
入力電流I-5585mA
入力高電圧VIH0.7×IOVCC-IOVCCV
入力低電圧ヴィルブイエスエス-0.3×IOVCCV

Backlight Characteristics (Ta=25°C, constant current)

パラメータシンボル最小タイプマックス単位コンディション
順電圧VF11.21213.2VIF=140mA
Forward currentIF-140-mA定電流
PWM周波数-25k-200kヘルツ-
Duty RatioD25%60%100%--
LED寿命LT20,000-50,000時間To 50% degradation

光学特性 (Ta=25°C)

項目シンボルコンディション最小タイプマックス単位
コントラスト比CRノーマルアングル600900--
Luminance (center)LVノーマルアングル750800-cd/m²
輝度均一性△L-80%90%-%
応答時間(Tr+Tf)-TC=25°C-3035ms
Viewing Angle (all directions)θCR≧107585-デグ
白色CIE(x)Wxノーマルアングル0.2420.2920.342-
白色CIE (y)ワイノーマルアングル0.2330.2830.333-
NTSC比--64%68%-%

Interface Pin Connection (LCM – 40‑pin FPC, partial)

ピン番号.シンボル説明
1LED-Kバックライト陰極
2LED-Aバックライト陽極
3GNDグラウンド
4VDDLCM power supply (3.3V)
5-16R0-R7, G0-G7RGB data (not used in MIPI mode)
29GNDグラウンド
30PCLKPixel clock (for parallel mode)
31ディスプレーDisplay control (H: normal)
32ハイシンクHorizontal sync
33垂直同期Vertical sync
34デンData enable

Full 40‑pin pinout including MIPI differential pairs (not listed in this table) available in the datasheet. CTP I²C pins (SDA, SCL, RESET, INT, VDD, GND) are provided separately.

信頼性と品質保証

信頼性試験項目(合格基準)

  • High temperature storage: 80℃, 48H (IEC 60068-2-2)
  • Low temperature storage: -30℃, 48H (IEC 60068-2-1)
  • High temperature operation: 70℃, 48H
  • Low temperature operation: -20℃, 48H
  • Temperature cycle (non‑operation): -20℃ ↔ 70℃, 30min each, 5 cycles
  • High temperature & humidity storage: 60℃ / 90% RH, 48H
  • Mechanical vibration (non‑operation): 10Hz~55Hz~10Hz, 1.5mm, X/Y/Z, 6H (packed)
  • Mechanical shock: 60G, 6ms, ±X/Y/Z, 3 times each
  • Package drop: 80cm height, one time each side
  • ESD (operation): Air ±8kV / Contact ±4kV, 330Ω/150pF, 5 times each

失敗の判定 No display defects, no glass crack, electrical/optical/mechanical conformance.

品質保証 (GB2828 / MIL-STD-105E 相当)

  • 検査レベル一般II、シングルサンプリング
  • Major defect AQL: 0.4
  • Minor defect AQL: 0.65
  • Inspection conditions: distance 300mm, temperature 25±5°C, angle 45°

取り扱い・保管上の注意

  • Avoid mechanical shock or dropping – glass panel and cover lens are fragile.
  • LCD液が漏れた場合は、直ちに皮膚や衣服を石鹸と水で洗うこと。.
  • 作業台は接地し、取り扱いや保管には静電気防止バッグを使用する。.
  • 保管0~35℃、40~60% RH、密閉ポリエチレン袋、直射日光を避けてください。.
  • Remove protective film slowly to avoid static discharge.
  • モジュールを分解または改造しないでください - 保証は無効です。.

Packing Method

モジュールは静電気防止トレイに入れられ、発泡保護材で積み重ねられ、段ボールで固定され、カートンで密封される。ご要望に応じて、詳細な梱包図面をご提供いたします。.

ご注文とサポート

The JicTech RH50I5XSC-H3 is available for engineering samples and mass production. For a complete datasheet, 2D drawing, or a quotation, please contact our B2B sales team.

Download product specification document: FULL SPEC-RH50I5XSC-H3

📩 見積もりまたはサンプルのご依頼は、Eメールまたは下記のお問い合わせフォームをご利用ください。.

最安値で購入するためにすぐに相談する 引用

24時間以内にお見積もりいたします。.