1.77-inch TFT LCD Module – 128×160 Display
The 1.77″ TFT LCD module from JicTech features a 128×160 display with vivid colors and support for SPI or MCU interfaces. Perfect for compact wearable devices, embedded electronics, and handheld applications.
Overview
The RT018T2T‑C04 is a 1.77‑inch TFT LCD Module designed for applications requiring a compact, bright, and easy‑to‑drive display. With a 128×160 RGB resolution, SPI interface, and integrated white LED backlight, this module is suitable for mobile devices, portable electronics, and embedded systems. Its transmissive TN panel with normal white mode ensures good readability, while the robust construction supports reliable operation in varied environments.
Key Features
-
1.77‑inch TFT transmissive display with 128×160 RGB resolution
-
SPI 3‑wire interface for simple microcontroller integration
-
High brightness: 200 cd/m² typical
-
Wide viewing angle with 12 o’clock recommended viewing direction
-
Compact module size: 34.0mm (W) × 44.0mm (H) × 2.4mm (T)
-
Driver IC: ST7735S
-
White LED backlight with two LEDs (Harvatek, 350‑400 mcd)
-
Operating temperature: ‑20°C to +70°C
-
RoHS compliant
Technical Specifications
| Category | Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|---|
| General | LCD Type | – | – | TFT Transmissive, Normal White | – | – | – |
| Panel Type | – | – | a‑Si TFT Active Matrix | – | – | – | |
| Resolution | – | – | 128 (RGB) × 160 | – | Dots | RGB Vertical Stripe | |
| Active Area | – | – | 28.03 × 35.04 | – | mm | – | |
| Module Size | – | – | 34.0 × 44.0 × 2.4 | – | mm | – | |
| Viewing Direction | – | – | 12 O’clock | – | – | – | |
| Driver IC | – | – | ST7735S | – | – | – | |
| Interface | – | – | SPI 3‑wire (SDI/SDO) | – | – | – | |
| Backlight | – | – | 2 White LEDs | – | – | Harvatek, Grade B | |
| Absolute Ratings | Supply Voltage (Logic) | Vcc | -0.3 | – | 4.6 | V | – |
| Input Voltage (Logic) | VIN | -0.3 | – | 4.6 | V | – | |
| LED Current (per LED) | ILED | – | – | 30 | mA | – | |
| Operating Temperature | TOP | -20 | – | +70 | °C | – | |
| Storage Temperature | TST | -30 | – | +80 | °C | – | |
| Electrical | Logic Supply Voltage | Vcc | 2.5 | 2.8 | 3.3 | V | VDD terminal |
| Input Low Voltage | VIL | -0.3 | – | 0.2VDD | V | – | |
| Input High Voltage | VIH | 0.8VCC | – | VCC | V | – | |
| LED Forward Voltage | Vf | 2.7 | 3.2 | 3.4 | V | – | |
| LED Current (Typical) | ILED | – | 15 | 20 | mA | Per LED | |
| Optical | Brightness | B | 200 | – | – | cd/m² | – |
| Contrast Ratio | CR | – | 300 | – | – | – | |
| Response Time | Tr+Tf | – | 25 | – | ms | – | |
| Viewing Angle (Horizontal) | θx± | 50 | 60 | – | deg | CR≥10 | |
| Viewing Angle (Vertical) | θy+ | 45 | – | – | deg | CR≥10 | |
| θy- | 60 | – | – | deg | – | ||
| NTSC Ratio | – | – | 55.3 | – | % | – | |
| Reliability | High Temp Operation | – | 70°C, 96h, powered | – | – | – | – |
| Low Temp Operation | – | -20°C, 96h, powered | – | – | – | – | |
| High Temp Storage | – | 80°C, 96h, unpowered | – | – | – | – | |
| Low Temp Storage | – | -30°C, 96h, unpowered | – | – | – | – | |
| Humidity Storage | – | 60°C, 90%RH, 96h | – | – | – | – | |
| Thermal Shock | – | -30°C ↔ +80°C, 10 cycles | – | – | – | – | |
| Vibration Test | – | 10–55Hz, 1.5mm, XYZ 2h each | – | – | – | – | |
| ESD Protection | – | Air: ±4kV; Contact: ±2kV | – | – | – | – | |
| Quality | AQL (Major Defects) | – | – | 0.65 | – | – | MIL‑STD‑105E Level II |
| AQL (Minor Defects) | – | – | 2.5 | – | – | – | |
| MTBF | – | – | 50,000 hours | – | – | Under normal conditions |
Interface Pinout
| Pin | Symbol | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | VCC | Power supply (2.8V) |
| 3 | SCL | Serial clock (SPI) |
| 4 | SDI/SDA | Serial data input (SPI) |
| 5 | RES | Reset (active low) |
| 6 | DC(NC) | No connect |
| 7 | CS | Chip select |
| 8 | DC(NC) | No connect |
| 9 | LEDA | LED anode (backlight) |
| 10 | LEDK | LED cathode (backlight) |
Applications
-
Mobile phones and portable communication devices
-
Handheld gaming consoles (PSP)
-
Personal Digital Assistants (PDA)
-
GPS navigation systems
-
Industrial control panels
-
Portable medical and test equipment
-
Consumer electronics displays
Reliability & Quality Assurance
-
Comprehensive environmental and durability testing
-
High‑standard inspection per MIL‑STD‑105E
-
50,000‑hour MTBF under normal operating conditions
-
Rigorous defect classification and AQL control
Packaging & Handling Notes
-
Modules are packed in anti‑static trays and boxes.
-
Recommended storage: 25±10°C, 50±10% RH, away from direct light.
-
ESD protection required during handling and assembly.
-
Soldering temperature not to exceed 280°C for ≤3 seconds.
Why Choose JicTech?
JicTech delivers reliable, bright, and easy‑to‑integrate TFT LCD modules backed by stringent quality controls and extensive reliability validation. With clear optical specs, wide temperature operation, and a simple SPI interface, the RT018T2T‑C04 is a trusted choice for portable and embedded display applications.
Ready to integrate a bright, compact display into your project? Contact us today for samples, pricing, and technical support!
Download Technical Documents
Click here to download this document:FULL SPEC-RT018T2T-C04
Consult immediately to get the lowest quote
We will provide you with a quote within 24 hours.


