2.8 Inch TFT LCD Module 240×320 MCU

Upgrade your embedded interface with the JicTech 2.8″ TFT LCD Module. Featuring 240×320 resolution, 350 cd/m² brightness, 8/16‑bit MCU parallel interface, and ultra‑slim 2.5mm profile, it delivers crisp 65K colors. Wide 6 o’clock viewing, 390:1 contrast, and 70% NTSC. データシート、サンプル、ボリューム価格については、JicTechまでお問い合わせください。.


概要

The JicTech RT028T5T-A1 is a compact 2.8‑inch TFT LCD module designed for cost‑sensitive embedded applications that require a bright display and simple microprocessor interface. Built on a TN panel (normally white) with anti‑glare polarizer, it offers 240×RGB×320 pixel resolution (QVGA), 65K colors, and a 6 o’clock optimal viewing direction. The flexible 8‑bit or 16‑bit MCU parallel interface enables easy connection to a wide range of microcontrollers. With 350 cd/m² brightness, 390:1 contrast ratio, and a slim 2.5mm thickness, this module is ideal for handheld devices, medical equipment, portable terminals, industrial control panels, and consumer electronics.

主な特徴

  • 2.8” diagonal TN panel – 6 o’clock best viewing direction (human eye optimal)
  • 240×320 resolution – sharp QVGA, 65K colors
  • モジュールサイズ – 50.0 × 69.2 × 2.5 mm (W×H×T)
  • アクティブエリア – 43.2 × 57.6 mm
  • 柔軟なインターフェース – 8‑bit or 16‑bit MCU parallel (optional)
  • 明るさ – 350 cd/m² typical – readable indoors
  • 高コントラスト比 – 390:1 typical
  • 迅速な対応 – 16ms typical (Tr+Tf)
  • 広色域 - 70% NTSC 標準
  • 広い動作温度 - 20℃〜+70
  • バックライト – 4 white LEDs (parallel), 80mA total current
  • ドライバーIC – ILI9341 (well‑supported, mature)
  • Anti‑glare polarizer – reduces reflection
  • RoHS対応

アプリケーション

  • ポータブル医療機器(患者モニター、診断ツール)
  • 産業用HMIおよびコントロールパネル
  • Handheld test & measurement equipment
  • スマートホームゲートウェイ&セキュリティパネル
  • 車載用補助ディスプレイ
  • Consumer electronics (MP4 players, digital photo frames)

技術仕様

一般仕様

パラメータ価値
LCDサイズ2.8インチ
パネルタイプa-Si TFT active matrix, TN (Normally White)
決議240 (RGB) × 320 pixels
表示モードNormally White / Transmissive
色数65K (6‑bit per color)
視聴方向6 o’clock (human eye best)
コントラスト比390 : 1 (typical)
輝度(明るさ)350 cd/m² (typical), 315 cd/m² (min)
モジュールサイズ(W×H×T)50.0 × 69.2 × 2.5 mm
アクティブエリア(W×H)43.2 × 57.6 mm
ピクセルピッチ0.180 × 0.180 mm
ドライバーICILI9341
インターフェースMCU 8‑bit / 16‑bit parallel (selectable)
バックライト4 white LEDs (parallel connection)
動作温度-20 ~ +70 °C
保存温度-30 ~ +80 °C

絶対最大定格

パラメータシンボル最小マックス単位
動作温度トップ-20+70°C
保存温度Tst-30+80°C
湿度RH-80 (at 39°C)%

DC特性 (Ta=25°C)

パラメータシンボル最小タイプマックス単位
ロジック電源電圧VCC/VCI2.52.83.3V
I/O電源IOVCC1.652.83.3V
入力電流イド-610mA
入力高電圧VIH0.7×IOVCC-IOVCCV
入力低電圧ヴィルブイエスエス-0.3×IOVCCV

バックライト特性(Ta=25℃、定電流)

パラメータシンボル最小タイプマックス単位コンディション
順電圧Vf2.93.23.4Vもし=80mAなら
LED current (total)もし-80-mA定電流

Optical Characteristics (Ta=25°C, IBL=80mA)

項目シンボルコンディション最小タイプマックス単位
コントラスト比CRノーマルアングル-390--
輝度(中央)LVノーマルアングル315350-cd/m²
輝度均一性δホワイト-80--%
応答時間(Tr+Tf)-TC=25°C-16-ms
視野角 (3:00)θLCR≧10-70-デグ
視野角 (9:00)θRCR≧10-70-デグ
視野角 (6:00)θUCR≧10-70-デグ
視野角 (12:00)θDCR≧10-50-デグ
白色CIE(x)Wxノーマルアングル0.250-0.360-
白色CIE (y)ワイノーマルアングル0.250-0.360-
NTSC比S--70%-%

Interface Pin Connection (parallel MCU)

11-12IM0, X+, Y-, X-, Y+I/PIM0 for interface mode select; X/Y for touch (not populated)
21DB4I/OData bus bit 4

ピン番号.シンボル入出力説明
1-4DB0-DB3入出力Data bus (lower 4 bits)
5GNDPシステム・グラウンド
6VDDPAnalog power supply (2.5–3.3V)
7/CSIチップ・セレクト(アクティブ・ロー)
8RSIData/Command select (1=data, 0=command)
9WRIWrite strobe (rising edge latch)
10RDIRead strobe (rising edge)
16APバックライト陽極
17-20K1-K4PBacklight cathodes (4 LEDs parallel)
22-30DB8-DB15, RESETI/O/IUpper data bus bits (8-15) and reset

Full 30‑pin pinout including NC and additional power pins available in the datasheet. Interface mode (8-bit or 16-bit) is set by IM0 and hardware strapping.

信頼性と品質保証

信頼性試験項目(合格基準)

  • High temperature storage: 80±2℃, 12H
  • Low temperature storage: -30±2℃, 12H
  • High temperature operation: 70±2℃, 24H
  • Low temperature operation: -20±2℃, 24H
  • 温度サイクル-20℃↔70℃、各30分、5サイクル
  • Damp proof test: 39℃ / 80% RH, 12H
  • Mechanical vibration: 10Hz~55Hz~10Hz, 1.5mm, X/Y/Z, 0.5H (packed)
  • Drop test: 1.0m height, one time each side (packed)
  • ESD test: Air ±4kV / Contact ±2kV, 330Ω/150pF, 10 times each

失敗の判定 ディスプレイ欠陥なし、ガラスクラックなし、電流Idd<初期値の2倍、コントラスト比≧初期値の50%、電気的/光学的機能が完全である。.

品質保証 (GB2828 / MIL-STD-105E 相当)

  • 検査レベル一般II、シングルサンプリング
  • 主要欠陥AQL0.065
  • 軽微な欠陥 AQL0.065
  • 検査条件:距離250mm、温度25±5℃、角度45度

取り扱い・保管上の注意

  • ガラスパネルは壊れやすいので、機械的な衝撃や落下を避けてください。.
  • LCD液が漏れた場合は、直ちに皮膚や衣服を石鹸と水で洗うこと。.
  • 作業台は接地し、取り扱いや保管には静電気防止バッグを使用する。.
  • 保管0~35℃、40~60% RH、密閉ポリエチレン袋、直射日光を避けてください。.
  • 手はんだ:320℃~350℃、最大10秒/パッド、繰り返し加熱を避ける。.
  • モジュールを分解または改造しないでください - 保証は無効です。.

梱包方法

モジュールは静電気防止トレイに入れられ、発泡保護材で積み重ねられ、段ボールで固定され、カートンで密封される。ご要望に応じて、詳細な梱包図面をご提供いたします。.

ご注文とサポート

The JicTech RT028T5T-A1 is available for engineering samples and mass production. For a complete datasheet, 2D drawing, or a quotation, please contact our B2B sales team.

Download product manual: FULL SPEC-RT028T5T-A1

📩 見積もりまたはサンプルのご依頼は、Eメールまたは下記のお問い合わせフォームをご利用ください。.

最安値で購入するためにすぐに相談する 引用

24時間以内にお見積もりいたします。.