Product Details: JicTech 13.3‑Inch E‑Paper Display Module
概要
The JS1330DNG05‑TNG‑A0 is a large‑format Active Matrix Electrophoretic Display (AM EPD) module designed for high‑visibility, low‑power information display applications. With a 13.3‑inch diagonal active area, it offers a clear, stable image with support for three colors (black, white, red) without the need for a backlight. The module integrates a complete driver system including gate/source buffers, timing controller, DC‑DC converters, SRAM, LUT, and VCOM generation, making it easy to interface via SPI. Its pure reflective, bi‑stable nature ensures content remains visible with zero power between updates.
主な特徴
-
Large, High‑Resolution Display: 13.3‑inch active area with 960×680 pixels for detailed text and graphics.
-
Three‑Color Support: Black, White, and Red (BWR) for enhanced visual communication.
-
Ultra‑Low Power Consumption: Deep sleep current as low as 3 µA; power only required during updates.
-
Integrated Driver System: On‑chip SSD1677 controller with OTP waveform storage, temperature sensor interface, and internal voltage regulators.
-
Dual Interface Options: Configurable 4‑wire SPI or 3‑wire SPI via hardware selection pin (BS).
-
Wide Viewing Angle & High Contrast: Pure reflective mode with excellent readability from all angles.
-
Robust & Slim Design: Module thickness of only 1.20 mm, RoHS compliant, and tested for industrial reliability.
-
Long Operational Life: Supports up to 1,000,000 update cycles or 5 years of continuous use.
アプリケーション
-
Electronic Shelf Labels (ESL) and retail price tags
-
Digital signage and information boards
-
Public transport timetables and wayfinding
-
Industrial and warehouse labeling
-
Smart office conference room displays
技術仕様
Pin Assignment (24‑pin connector)
Interface Timing (SPI)
Command Set Highlights
-
Driver Output Control (0x01): Gate settings and MUX configuration.
-
Deep Sleep Mode (0x10): Reduces power to microamps.
-
Temperature Sensor Control (0x18): Select internal or external sensor.
-
Write RAM (BW: 0x24, RED: 0x26): Load image data into display memory.
-
Master Activation (0x20): Trigger display update sequence.
-
Border Waveform Control (0x3C): Configure border display behavior.
Reliability & Environmental Testing
-
Low‑Temperature Storage: ‑25°C for 240 hours
-
High‑Temperature Storage: 60°C, 40% RH for 240 hours
-
温度サイクル： ‑25°C ↔ +60°C, 50 cycles
-
High‑Humidity Operation: 40°C, 80% RH for 240 hours
-
ESD Protection: Air discharge ±15 kV; contact discharge ±8 kV (finished product)
-
UV Exposure Resistance: 765 W/m² for 168 hours at 40°C
品質と検査基準
-
Inspection Level: Level II (GB/T 2828.1‑2012)
-
AQL: Major defects 0.65, Minor defects 1.5
-
Viewing Conditions: 30 cm distance, ±45° angle, 700‑1000 lux ambient
-
Zone Definitions: A‑zone (active area), B‑zone (outside active area) with specific defect allowances for dots, lines, and cosmetic issues.
取扱いと安全上の注意
-
Handle with care; display glass is fragile and may break if dropped.
-
Avoid exposure to harmful gases, moisture, and extreme temperatures.
-
Do not stack modules or apply pressure to the active area.
-
Clean only with a soft, dry cloth; avoid chemicals.
-
Store in original packaging at 15‑35°C, 30‑60% RH, away from direct sunlight.
パッケージに含まれるもの
-
13.3‑inch E‑Paper display module (JS1330DNG05‑TNG‑A0)
-
24‑pin connector interface
-
Reference design schematic for SPI interface (typical application circuit)
ご注文について
Note: Specifications are based on preliminary datasheet V0.1 and are subject to change. For design‑in support, custom configurations, or reliability requirements, please contact JicTech technical sales.
